| |
| |
| |
|
|
SYSTEM5:
modules for DIN guide (RS 232/422/485 - CAN - USB)
|
|
| |
|
|
 |
P51:
CPU |
Industrial
CPU, especially designed by Leomatic for its real-time
control systems based on SYSTEM5 modules.
It acts like a PLC and a CNC
together.
May be connected to a PC or to a user's panel
( 2 serial ports, 2 USB).
Suitable for most kinds of application. |
| |
|
|
|
P51S:
CPU |
Industrial
CPU, it's an evolution of CPU P51: better
performances and more communication ports (4 serial ports, 1
CANopen port, 1 USB).
It acts like a PLC
and a CNC together.
Suitable for complex and/or fast machines. |
| |
|
|
|
P53S:
motion control for
Stepper motors |
Motion
control card for 2 Stepper motors.
Main functions: interpolation, gear,
electronic cam, fast events. Max frequency out: 512 KHz.
Digital I/O expansion allowed through P59 modules
(generic signals or absolute encoder). |
| |
|
|
|
P63:
P.A.C. for Stepper motor
with integrated Driver |
Programmable Automation Controller
with an integrated Driver. |
| |
|
|
|
P58S: motion control for
Servo/Stepper motors |
Motion
control card for 2 Servo/Stepper motors. Each axis
type (DC, Brushless, Inverter, Stepper) may be configured.
Main functions: interpolation, gear,
electronic cam, fast events. Max frequency out: 512 KHz.
Digital I/O expansion allowed through P59
modules (generic signals or absolute encoder). |
| |
|
|
|
P57S: analog I/O |
8
inputs+ 4 outputs.
Each input type, range and filter may be configured. |
| |
|
|
|
P59: digital I/O +
RS232-CAN converter |
16
inputs + 16 outputs, photo-coupled.
Each output has a fan-out of 500 mA.
It is also an embedded bidirectional converter
RS232-CANBus; so you may connect this module directly to a PC
(via RS232) and then use its CANBus port as network to connect
any other SYSTEM5
module (P59, ...). |
| |
|
|
|
|
| |
|
P59-USB: USB-CAN Converter
[+ digital I/O] |
USB-CANBus converter [with optional I/O].
It is an embedded bidirectional
converter USB-CANBus; so you may connect this module directly to
a PC (via USB) and then use its CANBus port as network to
connect any other SYSTEM5 module (P59, ...).
As option, it may be supplied with some
integrated digital I/O (8
inputs + 8 outputs), which can be read/write by a
software on PC. |
|
| |
|
|
|
|
| |
|
P50-104:
Bridge / Front-End
for PC104 bus |
Bridge /
Front-End between PC104 Bus and Leomatic
SYSTEM5
modules.
Suitable for any PC104 system, it has 2 CANBus ports on which
may be connected any module of
SYSTEM5
family.
It acts like a bridge between the PC104 CPU and Leomatic
modules; it can also act as a Front-End, polling all connected
modules and presenting their refreshed images to the PC104 CPU. |
|
| |
|
|
|
|
| |
|
|
|
|
